Part 2 - 68 RS Vacuum Actuators |
|
| This section details the mounting of the Vacuum Actuators. It shows the routing of the vacuum hoses and the mounting of the actuator brackets. I apologize for the poor quality of the pictures, and hope to get some better ones up soon. |
|
 |
| The green hoses from the tee in front of the radiator support go to the nipples in the back of the actuator. The pink striped hoses from the tee in front of the radiator support go to the nipples in the front of the actuator. |
 |
| The hose connection to the front of the actuator is obscured in these photos by the wire to the directional light. The front of the actuator is secured to the bellcrank with a large clevis pin. |
|
 |
| The large rear actuator bracket mounts to the underside of the inner fender. |
 |
| The small actuator bracket mounts to the underside of the large bracket. The rear of the actuator is held in place by the clevis pin. |
|
 |
| This photo shows the back of the actuator shield. It bolts to the large rear actuator bracket. No, these aren't the correct bolts (yet). |
